Add site btimbc
From PTAGISWiki
Contents |
Procedure for adding a new site to the ALRS database
9/28/2007
Using the ALRS webapp for this site entry. Using these data sources:
- Legacy RKM table http://www.psmfc.org/pittag/DB_Codes/Codes-Main.html#TRS
- TMT rendition of RKM ftp://ftp.ptagis.org/Reports/TMT/rkmcodes.txt
1) BTIMBC, "Big Timber Creek, tributary to the Lemhi River", river, 44.5639°, -113.4013°, 17060204, 522.303.416.089, 0, 34.
Here are the tables and fields I needed to populate:
location
- loc_id: 730 [ 0 makes a new ID ]
- location_name: Big Timber Creek, tributary to the Lemhi River
- lat_decimal: 44.5639 (publish 6 points of precision for point sites)
- lon_decimal: -113.4013 (publish 3 points of precision for reaches)
- y_coord: 245
- x_coord: 441
river_segment
- SegId: 338
- HUC: 17060204
- Name: BTIMBC
- SegNbr: 1 (check other river segments in HUC to get this value)
- RiverKm: 522.303.416.089
- Description: Big Timber Creek, tributary to the Lemhi River
- ReachMinKm: 0 (must enter)
- ReachMaxKm: 34 (must enter)
location_in_segment
prompted for Sites of interest and segments of interest (case-sensitive) for both fields
- site_id: BTIMBC
- loc_id: 730 (from location table)
- seg_id: 338 (from river_segment table)
- site_type: riverbed
- site_description: natural environment
- locality_radius: 500
- general_locality_site:
- km_in_reach:
- km_total:
activity_location
- site_code: BTIMBC
- site_id: BTIMBC (key to location-in-segment)
- activity_category: hands-on
- activity_code: tagging, release, recovery
- activity_suffix: (con or non continuous flow)
- contact_id: -1
- activity_loc_description: Big Timber Creek, tributary to the Lemhi River
- from_km: 0
- to_km: 0
- from_date: 1/1/2007 (from Data > Reports > Interactive > Interrogation sites)
- to_date:
