Perform M4 Lab and Field Tests (Troy)
From PTAGISWiki
Contents |
Objective
Provide the test bed for M4 testing. Provide feedback to Software Engineers. Provide and install a M4 SbyC testbed at a operating site. To exceed at this task, provide feedback to the SEs that lead to improved function and ease of use.
Milestones
Troy 13:05, 27 November 2007 (PST) Working to incorporate Kennewick groups wish list into TTPro. Successfully tested TTPro.
Troy 15:57, 25 October 2007 (PDT) Built a M4 New Builds Installation Notes to document issues that arise during a new builds installation and initial testing.
Troy 08:17, 22 October 2007 (PDT)M4 installed on a Gateway Profile (Alan's old PC). Evaluations will take place by Kennewick employees in the next couple of weeks. John is working on a new build as there were issues with the install. Issues with the Device Masters is being worked out.
MIB delivered 09/05/2007. Some PLC training. Was successful sending message to Automated Solutions demo software. Had to 'tweek' the message instruction rungs and ad another message instruction for the 'secondary' PC.
Switch boxes complete, unit mounted on base. Needs cleaning and testing (08/30/2007)
Troy 15:05, 16 October 2006 (PDT) Passed contact information for a company called Matrikon on to Nadia as a possible solution for communication to/from M4 to the PLC. A separate PLC has been installed which will be dedicated to M4 and has been separated from the lab network. The M4 test bed is ready for testing.
Troy 15:05, 10 October 2006 (PDT)Created SOP M4 Beta Test
Issues
A message instruction has been built for Nadia's PLC. However, I need a response from Nadia on how she would like a test platform to be setup. Spoke to Nadia on 08/13/07 asking for the length she would like the cables. Switch box for MCJ almost complete, light box will be next. PLC enclosure and HMI done.
Troy 07:39, 12 December 2006 (PST)Nadia needs the PLC in her office mounted to the wall. Nadia and I have discussed providing her with a copy of RSLinx and RSLogix500 as the remote access to the PLC is no longer there.
Troy 15:58, 9 October 2006 (PDT) No product to test yet...
