SOP Red Lion HMI Configuration

From PTAGISWiki

	Standard Operating Procedure
Subject:	SOP Descriptive Title
Author:	Your Name Here
Approved by:	UNAPPROVED

Contents 1 Objective 2 Scope 3 Responsibilities 4 Procedure 4.1 Step 1 4.2 Procedure Step 2 5 References

Objective

Write a more descriptive version of the Subject listed above.

Scope

Describes the limits of this procedure. That is, does this procedure only apply to a certain type of location or file type or installation or department? Is there a limit to the capacity of the system, volume, or throughput?

Responsibilities

Write about who is responsible for what aspects of the procedure here.

Procedure

Step 1

Write details in a step-by-step, chronological manner. Use action verbs.

Procedure Step 2

1. From the project window on the left hand side double click on Channel Configurations under the Controller folder.

Channel Configuration General Tab

• The General Tap will appear on top.
• Verify that the Passthru Link ID (dec) parameters match for each channel.
• Typically set to 1 for each channel.

References

Write references here.